Hi, I’m Staci’s husband, Doug. She has asked me to write a guest post on the blog about the details of our new pine shelves.
Just like nearly all of the projects that we have undertaken in our three domiciles since we have been together, Staci was once again the lead engineer of this endeavor. Her creativity never ceases to flow! I was happy to help, and after a bunch of careful measurements (which ended up not being so careful after all– more on that later) we began by buying the needed materials. I’m decidedly a “list” guy, so instead of intricately weaving each material into a well written example of how it was implemented like I’m some sort of writer, I’ll simply list what we bought and from whence it was got;
- The hanging structure, and shelf supports —IKEA’s ALGOT (link to similar configuration)
- Drywall screws –Local hardware store, such as Ace, Home Depot, Lowe’s
- Untreated pine boards 1″ X 10″ X 12′ –Home Depot
- Laser level –Lowe’s
- Power Drill –Home Depot
Putting up the brackets and shelf supports was the easy part. We simply bought enough length of the top horizontal piece, which came in several sizes and slapped it on by pressing the pieces against the underside of the counter and screwing them into place. We then placed each of the vertical supports evenly throughout the 9 feet, with the laser level as our trusty companion. Once we popped in the super-easy shelf supports, we decided to call it a night. The only thing left to do was to put the carefully measured and tenderly cut shelves into place!
Since the spot we wanted to shelve measured exactly 9 feet (or 108″) I proceeded to buy enough pine to make 3 shelves that spanned the entire space. This was the second day of the project. I bought three 12-foot boards and had them each cut into 4.5-foot pieces. This obviously gave us extra, but it seemed to be the cheapest way to buy 27 feet. In other news, Mosey appears to be taking a yoga break after some diligent work.
Wait, the space was 108 inches, right? Wrong; we must have rounded up from 107 and 3/4 of an inch-ish. Oops.
Commence the troubleshooting! While Staci was at work, I started using a small sanding block to carve down the end of one of the shelves to see if I could make them fit. After about 20 minutes of this nonsense (and the onset of a rapidly over-exerted arm), I remembered that we owned an electric sander. The sander bailed me out, not unlike San Diego’s Philip Rivers bailed out my beloved Kansas City Chiefs a few years back during a Monday night game… by fumbling a crucial snap and resulting in a Chiefs victory!
So, after some fluid electric sanding and the aid of a make-shift saw horse out of a cheap folding lawn chair, I adapted the shelves to fit in the space! And…. voila, when Staci got home from work, she was greeted with this: (!!!)
Staci here– A huge thanks to Doug for not only saving the day by finishing the shelf installation, but also for filling in by writing this post on an evening when my brain couldn’t put coherent thoughts into sentences. We have really enjoyed filling up the shelves and are both truly enamored with them… We’ve spent many hours patting ourselves on the back and gazing at the finished product. ;)